Doepfer

Yeah i have 2 of the diy kit #1 doepfer psus in one 18 u case (ie 6 bus boards, 3 bus board per psu) and this is fine for me. Just means my modular rack uses 2 wall sockets not one now. But note that you need to calculate the total current draw on a module by module basis-stated by manufacturers-not just what would seem to fit the cabinet/rack size. It is best to add the total draw for positive and the total draw for negative together then add 10%. as soon as that approaches your max current draw you need to upgrade.



On 9 May 2013, at 17:25, James Husted <james.husted@mac.com> wrote:

> A second supply in the cabinet. Have one supply run one set of motherboards and the second run what is left. 
> -James
> 
> James Husted
> Designer, Synthwerks LLC
> www.synthwerks.com
> james@synthwerks.com
> synthwerks@me.com
> 
> On May 9, 2013, at 8:36 AM, Renato <renato.quaroni@gmail.com> wrote:
> 
> > I'm wondering what methods could be employed to get more than the 1200mA?
> > Please consider that my knowledge of electrical work extends as far as
> > changing a plug...
> > 
> > Thanks in advance,
> > Renato
> > 
> > 
> > [Non-text portions of this message have been removed]
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> > 
> 
> 


[Non-text portions of this message have been removed]