Doepfer

Dear Dieter,

Many taking the time to reply in person.

My homemade footwitch controller is now all wired up and working nicely with the A177.2 - a great way to expand interation with my A100 system!

Regards,

Neal

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> Hello Neal,
> 
> a closed switch generates a low gate output, an open switch generates a high
> gate output. Everything else depends upon the wiring of your switches with
> the A-177-2 sockets.
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von neal_beard_ahm
> > Gesendet: Dienstag, 30. April 2013 11:55
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] A177.2 foot switch wiring
> >
> >
> > Hello all.
> >
> > I'm making a double footswitch to use with my a177.2 module.
> >
> > I have two NC push to break foot switches going to a TRS 1/4inch
> > stereo jack out but was wondering how to wire it?
> >
> > Looking at the a170 manual: switch 2 is tip, switch 1 is ring and
> > ground is sleeve but which connections do the NC switches break/make?
> >
> > I'm guessing that the tip and ring are wired to ground though the
> > foot switches, with the foot switches breaking the connection
> > when pressed?
> >
> > Thanks,
> >
> > Neal
>