Doepfer

thanks Dieter!


2013/5/3 <yahoo@doepfer.de>

> **
>
>
> Not the clock signal but the reset signal triggers the reset, i.e. a
> positive voltage (not the rising slope !) at the reset input resets all
> A-160 outputs to zero and A-161 to step 1. The reset is static, i.e. as
> long
> as the reset signal is high all A-160 outputs remain low and A-161 stays at
> step 1 (even if clock pulses are present). Clock and reset are independent
> from each other for A-160/A-161 combo (in contrast to the A-154 where a
> reset signal triggers kind of a "wait state" and the actual reset is
> carried
> out at the next clock pulse that follows the reset).
>
> Best wishes
> Dieter Doepfer
>
> > -----Ursprungliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Peter Sedin
> > Gesendet: Freitag, 3. Mai 2013 08:09
> > An: doepfer_a100
> > Betreff: [Doepfer_a100] a-160/161 question
>
> >
> >
> > At muff wiggler I read that the clock pulses does not reset the divisions
> after reset.
> > like in the picture.. why not???
> >
> >
> > Mvh
> >
> > Peter H.K Sedin
>
>  
>



-- 


Mvh

Peter H.K Sedin


[Non-text portions of this message have been removed]