Doepfer

Hi,
Yes, that's exactly what I meant. But I've solved the problem.
In my upper row, the VCO's were located as was the ADSR, in the lower row the 190-2. I had connected the two rows (bus boards) with that small Gate/CV cable and that did not worked, as I described before.
Now I have also put the 190-2 in the upper row, disconnected the cable and the behavier is back normal.
So it obvious had something to do with splitting up signals over two rows (bus boards).
Thanks anyway but everything seems normal now, only the modules are not in a place were I liked to have them.

Cheers,
------------------------------------------------------
Danny Budts
info@syndromeda.be
www.syndromeda.be

  ----- Original Message ----- 
  From: yahoo@doepfer.de 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Monday, March 04, 2013 2:27 PM
  Subject: AW: [Doepfer_a100] 190-2 Strange behavier?


    
  > Thanks for the fast answer Dieter, but the 190-2's are in
  > independent cases - no connections.
  > If I turn up the VCA gain until I hear a constant audible sound I
  > can hear it is responding to the whole frequency range.

  Sorry - but I have problems to understand the issue. Do you mean that the
  full 5 octave range of the A-190-2 is covered when you open the VCA ?

  Best wishes
  Dieter Doepfer



  

[Non-text portions of this message have been removed]