Doepfer

Bit of a late entry here, but there appears to be a choice between  
including the cycle switch (not found on a stock STS DUSG) or a  
bipolar output (present).

Cycle can be patch-programmed with a patch cord from Gate to Trigger,  
then  if Gate is used for anything else it would need to be mult-ed.

Bipolar can be patch-programmed using i.e. an offset/attenuator module.

Is this trade-off worth a poll at some point?

Martin

Sent from my iPhone

On 12 Dec 2012, at 15:11, <yahoo@doepfer.de> wrote:

> As the negotiations with Serge and Ken Stone are nearly finished I  
> decided
> to publish the preliminary info page about the planned module on our
> website:
>
> www.doepfer.de/a1712.htm
>
> Maybe we will add some features so that 3-position switches can be  
> used
> (e.g. log/lin/exp instead of log/lin only and two different cycle  
> modes).
> But these decisions depend upon the results with the first prototype  
> which I
> expect in January 2013.
>
> Best wishes
> Dieter Doepfer
>
> 


[Non-text portions of this message have been removed]