Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

RE: [Doepfer_a100] A-120 Output Level

2002-10-23 by David Salter

My A120 has always had a lower output than both my A121's. 
 
Regards
 
 

David Salter 
Reuters Consulting 
Tel: +44 20 7542 2402 
Mob: +44 7990562402 
Fax: +44 20 7542 2699 

	-----Original Message-----
	From: ethanzer0 [mailto:ethanzer0@yahoo.com] 
	Sent: 23 October 2002 16:17
	To: Doepfer_a100@yahoogroups.com
	Subject: [Doepfer_a100] A-120 Output Level
	
	
	Hi All,
	
	I was using my A-120 and A-121 last night in two different
patches 
	and I noticed the output of the A-120 was significantly lower
than 
	the output of the A-121.  I checked input level and output
settings 
	etc.  I don't remember the A-120 as having a lower over-all
output 
	level than the A-121.  Has anybody else ever noticed this?  Do I
need 
	to re-calibrate my A-120?
	
	Thanks in advance,
	
	Ethan
	
	
	
Yahoo! Groups Sponsor	
ADVERTISEMENT

 
<http://rd.yahoo.com/M=212804.2460941.3878106.2273195/D=egroupweb/S=1705
032144:HM/A=810327/R=0/*http://geocities.yahoo.com/ps/info?.refer=blrecs
>
<http://rd.yahoo.com/M=212804.2460941.3878106.2273195/D=egroupweb/S=1705
032144:HM/A=810327/R=1/*http://geocities.yahoo.com/ps/info?.refer=blrecs
> 	
 
<http://us.adserver.yahoo.com/l?M=212804.2460941.3878106.2273195/D=egrou
pmail/S=:HM/A=810327/rand=843045681> 	

	To unsubscribe from this group, send an email to:
	doepfer_a100-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> . 
	



------------------------------------------------------------- ---
        Visit our Internet site at http://www.reuters.com

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.


[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.