Doepfer

> hi Dieter! i was considering adding the glide option to my Dark
> Energy, but my unit is one of the very early ones that doesn't
> have the hole & plastic plug in front for the glide knob
> placement. i'm guessing unless i completely diassemble the entire
> unit and try to manually drill a hole myself i'm out of luck?
> just thought i'd ask. thanks! -chris

You have to remove the bottom cover and find a position where the parts of
the glide option do not touch any other electronic part or pc board. Then
you may drill a suitable hole at the desired position into the case. Pay
attention not to damage the pc boards and that no metallic swarfs from
drilling remain inside the case as they may cause short circuits.

Best wishes
Dieter Doepfer