Changing the determining capacitors... Can't it be variable, some kind of "vari-capacitance"? And put this under CV control as well! And a different CV for stage 1-6 and stage 7-12 of the A-101-3. .. I would buy that immediately. --- In Doepfer_a100@yahoogroups.com, Bakis Sirros <synth_freak_2000@...> wrote: > > so, if i understand it right: > > if you had a phaser module for low (subaudio) frequencies you could create, from (say) a sinewave lfo, 'out of phase' copies of this sinewave? > > am i right on this? > > (for example inverted sinewave, 90 degrees and 270 degrees out of phase sinewave, etc...) like a quadrature lfo, but having not only 4 or 8 phases, but many of them? and this phase offset would be voltage controlled...) > > seems nice.... > > > > > > > ________________________________ > From: Florian Anwander <fanwander@...> > To: Doepfer_a100@yahoogroups.com > Sent: Friday, June 8, 2012 12:40 PM > Subject: Re: [Doepfer_a100] Re: Low frequencies phase shift with A-125. > > > Â > Am 08.06.2012 11:12, schrieb ctujoao: > > > Would be nice to output CVs (any shape, not only sines from > > quadrature modules), at a desired phase. > > Basically it could be doable with a phase shifter too, you only have to > change the range to a different range for the center frequency. > Assumingly this can be achieved by simply changing the determining > capacitors in the circtuit. Dieter might provide a deeper insight in this. > > Florian > > -- > http://fa.utfs.org/ > > > > [Non-text portions of this message have been removed] >
Message
Re: Low frequencies phase shift with A-125.
2012-06-08 by ctujoao
Attachments
- No local attachments were found for this message.