Doepfer

How about that idea with voltage adressing? I thought that was for me the
main interesting feature...

On Mon, Jun 4, 2012 at 12:09 PM, Bakis Sirros <synth_freak_2000@yahoo.com>wrote:

> **
>
>
> and what if someone wants only one such module?    :D
>
> that's why you probably have to let me create the polls, UNLESS of course
> you first think in detail what the poll should read like and all the
> options of the poll, so it can give a useful result for Dieter. then of
> course everyone is free here to start a poll, but make the poll options
> useful.
>
> thanks for your understanding.
>
>
> Bakis
>
> ________________________________
> From: "Doepfer_a100@yahoogroups.com" <Doepfer_a100@yahoogroups.com>
> To: Doepfer_a100@yahoogroups.com
> Sent: Monday, June 4, 2012 12:54 PM
> Subject: [Doepfer_a100] New poll for Doepfer_a100
>
>
>
>
>
> Enter your vote today! A new poll has been created for the
> Doepfer_a100 group:
>
> Should Doepfer release a small 8 step sequencer with the following inputs
> and outputs:
>
> Inputs:
> Start
> Stop
> Hold
> Reset
> Direction
>
> Outputs:
> CV
> Individual Gate-outputs a step
> Trigger / Clock
>
> I dont think it needs his own clock.
> So you will always need a external trigger to get it running.
> This way we the costs on the module.
> Assuming that everyone has a LFO with square output or something similar
> to drive the clock.
>
> Maximal width would be around 14 HP.
>
> o Yes, I want at least 2
> o Yes, but it needs his own clock
> o No, no interest at all
>
> To vote, please visit the following web page:
> http://groups.yahoo.com/group/Doepfer_a100/surveys?id=13140510
>
> Note: Please do not reply to this message. Poll votes are
> not collected via email. To vote, you must go to the Yahoo! Groups
> web site listed above.
>
> Thanks!
>
> [Non-text portions of this message have been removed]
>
>  
>


[Non-text portions of this message have been removed]