Doepfer

Thanks again Dieter , I'll do that.

Ricardo



--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> > Hi Dieter 
> >
> > Thanks for the advice,
> >
> > What I actually need is to build a case with a Doepfer PSU2 and
> > connect a Mean Well S-40-5 (+5v) output switching power supply to
> > add a powerful +5 to it , this is in order to use 3 x Metasonix
> > r55 modules that suck a lot of +5v. I also wanted to have
> > independent power switch for it (as they draw a lot of power ) so
> > thought in a 3u case , BUT NOW i realized that one of the two
> > back panels in a G6 case (the top one) can be removed and
> > replaced with a a-100 b84p , that has the PSU2 already installed,
> > then un-plug the top bus board and connect it to the top PSU2
> > (the one that also has to be upgrade with the Mean Well +5 v .
> > That way I can have a G6 case with two PSU each one with it's own
> > power switch and fuses and it's own bus board. The top part for
> > those tube modules. 
> > I can ask a technician to do the job for me.
> 
> Yes, this should work. But do not forget to connect the GND of all power
> supplies to obtain a common GND reference for all modules.
> 
> Best wishes
> Dieter Doepfer
>