Doepfer

Cases like that are often quite expensive. If you can handle some simple
woodwork or know someone who does then I would get a carcase made (MDF,
Plywood etc) and then use one of the rail systems available. TipTop do one
and I have my Construct-A-Rack series. In fact if you use mind and don't
mind the industrial look al an aluminium case then you can add my covers and
have an enclosed rack without any additional gear i.e. 1 x 3U rack plus
top/bottom cover and you are done. Have a look at my site
www.elby-designs.com


Best Regards
Laurie Biddulph
Mobile: 0400 257 645
Web: www.elby-designs.com

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On
Behalf Of ricardo
Sent: Saturday, May 12, 2012 9:05 AM
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Building a A-100 G3 style 19" / 3u alu case.

Hi , 
I'm trying to build something like the A-100 G3 ( because they are not
available anymore and need to fit the space) ,

Reading in the Doepfer web i found this: 
http://www.gie-tec.com/housings---profiles/19-inch-enclosures/index.html

there i found the alu frames and mounting rails and top + bottom sides.
Apart I'm buying the  Doepfer PSU2, back panel with switch and fuse holder,
and bus. 

Please let me know if someone has already built one like that before and if
I'm doing well in getting those parts. Is it money wise convenient? 

Thanks

Ricardo



------------------------------------

Yahoo! Groups Links