Doepfer

Hi Marco,

Thanks for thinking with me ;-)

You write: 
> i have my external mixer bringing the mono-signal to L and R speaker.
Does it still after routing through a multiples?

Love to hear!

Ton


--- In Doepfer_a100@yahoogroups.com, "marco_zambardi" <marco.zambardi@...> wrote:
>
> strange...
> usually modules use mono jack in and patching them with a stereo cable have no effect since there should be no connection (except for modules with a switch in the jack in to break normalled connection).
> 
> i have my external mixer bringing the mono-signal to L and R speaker.
> 
> i will have a try.
> 
> --- In Doepfer_a100@yahoogroups.com, "Ton Akveld" <aca@> wrote:
> >
> > Dear group,
> > 
> > Just like Bakis I want to wish you all a good 2012!
> > 
> > But now, something completely different.
> > 
> > When plugging in headphones in an audio out connector (VCA, mixer) I hear both the left and right channel.
> > However, if I route the audio out through a multiples, the audio signal is halved, only the left channel is left.
> > Is this caused by a difference in the audio out and multiples connectors?
> > Hope someone can tell.
> > 
> > Warm regards,
> > 
> > Ton
> >
>