Doepfer

yes, if you want to control the A-110 from the LP keyboard, then you need to 'very-slightly' multiply the little phatty's keyboard cv output, via the A183-3 Amplifier module.

 
Bakis 


________________________________
From: Lars <lahebr2000@yahoo.se>
To: Doepfer_a100@yahoogroups.com
Sent: Sunday, November 6, 2011 11:36 PM
Subject: [Doepfer_a100] A-183-2


  
Hi!

Would the A-183-2 take care of the slight mismatch of Moogs slim little phatty to match up with my Doepfer A-110 oscillators.  Read that moog CV is not true 1 volt per octave - more like 0.97 per octave.  (The moog goes horribly out of tune when going above one octave). Tried the A183-1 attenuator but it doesn't work (goes the wrong way).  Someone told me I need to multiply to the voltage slightly.  Hoping the A-183-2 would do the trick since it can do offset (and multiply?).
Grateful for any help on the matter...

/Lars


 

[Non-text portions of this message have been removed]