Doepfer

Hi,

Thanks.  But the jumper is in the correct position, and I was unclear: I'm trying to use it to send voltage to an A-111 (and the 164-1 to send gate to the A-140, both of which are on a different bus).  The A-185-2 and A-111 are on the same row/bus in a A-100P6 suitcase, but the A-111 doesn't notice the Adder at all.

Any ideas on what I'm doing wrong?
Ernst


--- In Doepfer_a100@yahoogroups.com, "synovatron" <tony.steventon@...> wrote:
>
> Hi Ernst,
> 
> The A-185-2 has a jumper J5 which needs to have the link connecting the two lower pins to get CV out to the bus. The A-185-2, unlike the A-185 does not have a gate bus connection so the A-140 will not get triggered. Also if you have multiple bus boards you will need to link them for the bus signals to work on all boards.
> 
> Cheers
> Tony
> 
> --- In Doepfer_a100@yahoogroups.com, "E Karel" <eklkrl@> wrote:
> >
> > Hello list,
> > 
> > I just bought an A-185-2 precision adder and an A-164-1 manual gate, but neither one seems to be sending signals to the bus.  I have an A-111 on the same bus as the 185-2 in a Doepfer suitcase, and an A-140 on the same bus in a Base Case, but neither one of them is responding.  The modules are working if I patch them.  I've never tried to use the bus before.  Is there something I need to do to prepare the bus?
> > 
> > thanks,
> > Ernst
> >
>