I tend to disagree. having tried both methods of controlling the MS-20 over the years, using the native Hz/V and S-trig inputs has produced far more musical results in my experience, and has left the modulation paths open for pitch and timbre controls. I have considered building an MS-02 clone, knowing that many MS-20 owners would appreciate owning such a device to avoid the kludge of the workaround used by some (as mentioned below). it does work in a pinch though. On Jul 12, 2011, at 4:03 AM, Florian Anwander <fanwander@mnet-online.de> wrote: > Hello, > > A V/Oct --> V/Hz converter is not really necessary, as the MS20 provides > V/Oct inputs (VCO/VCF CV-In). For Gate->Korg Trigger conversion you may > use a A150 (VC switch) or a A165 (gate converter): the Korg trigger > input accepts switched triggers (close to ground) and/or inverted Gates. > > Florian > > Stuart wrote: > > The MS-02 was designed as converter between Hz/V and Oct/V synths so they can be > > used together as if they all talk the same language. I want to investigate if > > there is enough interest for a module that has the functionality of the Korg > > MS-02. It makes it possible to integrate Doefer modules with Korg synths and > > vice versa. You don't need an expansive SQ-10 but could use the A-155 sequencer > > instead. Etc. > > > > > > > > ________________________________ > > From: York Luethje<ybl@yahoo.com> > > To: Doepfer_a100@yahoogroups.com > > Sent: Mon, July 11, 2011 9:55:14 PM > > Subject: AW: [Doepfer_a100] New poll for Doepfer_a100 > > > > > > Forgive me if I fail to see the point of this. Wasn't the MS-02 designed > > specifically because the MS series runs on Hz/Oct as opposed to V/Oct? For > > all other functions of the MS-02 there already exist modules in the Doepfer > > range as far as I can see. So you want Doepfer to produce a Hz/Oct > > converter? > > > > _____ > > > > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > > Gesendet: Montag, 11. Juli 2011 11:35 > > An: Doepfer_a100@yahoogroups.com > > Betreff: [Doepfer_a100] New poll for Doepfer_a100 > > > > Enter your vote today! A new poll has been created for the > > Doepfer_a100 group: > > > > In my search for a Korg MS-02 I haven't been successful so far. In building > > a great A-100 modular synth I was. This got me thinking: It would be great > > if Doepfer would add a module to the A-100 module list with the > > functionality of the Korg MS-02. I can imagine more people are interested. I > > sent the question to Dieter and he suggested to start a poll on this list. > > So here we go. > > > > o I would be interested in a Korg MS-02 like module as long it's cheaper > > than 100 euro > > o I would be interested in a Korg MS-02 like module as long it's cheaper > > than 150 euro > > o I would be interested in a Korg MS-02 like module as long it's cheaper > > than 200 euro > > o I'm not interested in such a module > > > > To vote, please visit the following web page: > > http://groups.yahoo.com/group/Doepfer_a100/surveys?id=13091910 > > > > Note: Please do not reply to this message. Poll votes are > > not collected via email. To vote, you must go to the Yahoo! Groups > > web site listed above. > > > > Thanks! > > > > [Non-text portions of this message have been removed] > > > > > > > > > > [Non-text portions of this message have been removed] > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > > > > > [Non-text portions of this message have been removed]
Message
Re: AW: [Doepfer_a100] New poll for Doepfer_a100
2011-07-12 by Giorgio
Attachments
- No local attachments were found for this message.