>>What widths do you have? Hi David, They are listed on the page, but, in case you cant see it (at work etc) - Matt Blue12hp Matt Blue12hp Matt Blue10hp Matt Blue10hp Matt Blue10hp Matt Blue10hp Matt Black8hp Gloss Blue8hp Gloss Blue8hp Gloss Blue8hp Gloss Blue4hp I have a load of silver somewhere also, but i will have to dig them out. I guess this was partially 'testing the water' to see if it was a popular concept / if the pricing was resonable / etc. I think the other companies charge about GBP 25 for a 4hp panel - even my12hp (3x as wide) that ive listed above are priced at less than that : ) (but, its not quite like for like, as, you would have to drill all but the mounting holes yourself, but most DIY sorts will find that easy enough) The idea is for it to be a quick and cheap service, but, obviously, if i start charging too little, it would get to the point where i should do somthing else instead! Julian
Message
Re: [Doepfer_a100] engraved eurorack panels for DIY modules
2011-03-07 by Julian
Attachments
- No local attachments were found for this message.