Doepfer

And are they all programmed to the same reference note ? Otherwise the transposition is different.

Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von RICHARD HORSMAN
> Gesendet: Donnerstag, 3. Juni 2010 18:20
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] chained A-190-2's give strange results
> 
> 
> Are they all disconnected from the gate and CV bus?
> 
> 
> 
> 
> ________________________________
> From: silvercreekvalley <silvercreekvalley@yahoo.com>
> To: Doepfer_a100@yahoogroups.com
> Sent: Thursday, 3 June, 2010 17:01:49
> Subject: [Doepfer_a100] chained A-190-2's give strange results
> 
>   
> I've got three A-190-2 (MIDI->CV converters) chained together so 
> that the out from one goes to the 'in' on the other. I'm using 
> the PCB pins for MIDI IN/OUT to do this as per the manual.
> 
> I've set the key mode to 'stack', and set all the 190-2's so that 
> they receive on midi channel 1.
> 
> The three units all work, and as I press keys, the appropriate 
> 190-2 triggers (ie the third unit triggers if 2 keys are already 
> held down).
> 
> However, while the pitch on the first unit is fine (its connected 
> to a A110), on the second and third units the pitch is 2 or 3 
> octaves lower. In fact its just clicks.
> 
> Any ideas what I've done wrong? For the three A110 modules, the 
> range and tune settings are all identical.
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>