Doepfer

hi Steve,

no.
Analogue systems modules have different connectors!
you can buy special connectors to connect ASystems modules to a doepfer case from analogue systems (or analogue haven, i think):

thanks,
Bakis.



Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. vu-us. com

www. shimarecords. co. uk

--- On Mon, 2/22/10, Steve <stevebdar@yahoo.com> wrote:

From: Steve <stevebdar@yahoo.com>
Subject: Re: [Doepfer_a100] Newbie Question:  Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Monday, February 22, 2010, 10:31 PM







 



  


    
      
      
      Hi Bakis:

 

Would the same apply to an ASys RS50 and RS60?

 

 

Thanks

 

 

Steve B



--- On Sat, 2/13/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote:



From: Bakis Sirros <synth_freak_ 2000@yahoo. com>

Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case

To: Doepfer_a100@ yahoogroups. com

Date: Saturday, February 13, 2010, 2:57 AM



  



hi Steve,



Plan B modules use the standard doepfer type ribbon power cable.



just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends.



thanks,

Bakis.



Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist



[Doepfer_a100] group owner



www. parallel - worlds - music. com



www. myspace. com/ parallelworldsmusic



www. myspace. com/ interconnectedmusic



www. myspace. com/ memorygeist



www. DiN. org. uk



www. musicamaximamagneti ca. com



www. vu-us. com



www. shimarecords. co. uk



--- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote:



From: stevebdar <stevebdar@yahoo. com>

Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case

To: Doepfer_a100@ yahoogroups. com

Date: Saturday, February 13, 2010, 6:46 AM



 



I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.



My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?



Thanks



Steve B



[Non-text portions of this message have been removed]



[Non-text portions of this message have been removed]





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]