Doepfer

> i'm feeding the wasp filter with a silent sound source, is there
> a way to make the volume higher than the maximum of the level knob?
> i have an external input module with a gain knob, but not in this
> tiny case i use live.
> can i get the gain higher just by modifying the wasp filter
> module a little?

Please look at the A-100 DIY page, section 4.1.1. Changing the sensitivity
of manual controls, control voltage inputs and audio inputs

For A-124 it's R1 (27k) located just behind the potentiometer for audio
level control. If you reduce the value (factory 27k) of this resistor the
max. loudness increases. Another solution will be the usage of the planned
A-183-3 amplifier module.

Best wishes
Dieter Doepfer