Doepfer

You can make a triple CV switch with an A150 and a pair of 
attenuators, so that the CV range is broken into three segments. The 
breakpoint for each segment would be selected by setting each of the 
attenuators so that the A150 switching threshold is reached at that 
voltage.

If you need to divide the cv signal into 4 parts instead of three, you 
could use two A150s and three attenuators, one attenuator for each CV 
threshold.

Joe

--- In Doepfer_a100@y..., "ksoze604" <ksoze604@h...> wrote:
> Does any one know of a way with current modules to create a way to 
> divide a cv signal into 4 parts. Then to have those four parts 
output 
> a gate signal on seperate outs when in that range. Basically an A150 
> but instead of two selectable I/O's to have four or some thing like 
> the quad seq. switch but not sequential with the stage selected with 
> a cv range.
> 
> Thanks,
> 
> Scott