Doepfer

HI JOE,
THANKS FOR YOUR TIP ABOUT THE A170 AND THE A150.very
useful!!!for delayed gates.
bakis.


--- buechlerjoe <buechlerjoe@toadmail.com> wrote:
> Patch a gate signal to the A150 Switch's I/O2 jack,
> and also to the 
> A170 Slew Limiter's input jack. The A170's output is
> patched to the 
> A150's CV jack. The A150 O/I output is patched, for
> example, to an 
> ADSR for a delayed envelope.
> 
> By adjusting the "rise" slew rate, you can control
> the length of the 
> delay between the time that the gate starts, and
> when the A150 switch 
> closes, feeding the shortened gate to your
> modulation patch. 
> 
> The "fall" slew rate is kept to zero so that the
> delayed gate ends 
> simultaneously with the original gate. This is the
> big advantage that 
> this patch has over the A162, which doesn't respond
> to the end of a 
> gate. The A162 starts at the trigger leading edge,
> delays, then 
> outputs a gate for a predetermined time, regardless
> of whether the 
> note being played is sustained or staccato ("free
> running").
> 
> i like your suggestion about the A142!
> 
> Joe
> 
> --- In Doepfer_a100@y..., "synth_freak_2000"
> <synth_freak_2000@y...> 
> wrote:
> > 
> > 
> > 
> >  In Doepfer_a100@y..., "buechlerjoe"
> <buechlerjoe@t...> wrote:
> > >> Thats how I use the A162 also. Too bad it
> doesn't CV control of 
> > delay 
> > > time to create "swing" notes (oops! no
> suggestions for 
> improvements 
> > > please!)
> >  
> > you can acieve some thing useful with the
> a142...by 
> > voltagecontrolling the decay time you can have
> voltegcontrolled gate 
> > length for the gate output.
> > 
> > >The A170 Slew Limiter patched to an A150 
> > > switch is a better approach for delayed
> modulation.
> > 
> > explain more,please...
> > synthfreak
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Yahoo! Sports - sign up for Fantasy Baseball
http://sports.yahoo.com