No, thanks, Mark; I inadvertently posted an empty response, but didn't mean to post anything at all. Please excuse the intrusion. -- Sam On Jan 17, 2010, at 4:03 PM, Mark Savoia wrote: > Sam? Did you say something? I see no comment. > > Mark > http://www.stillrivereditions.com > > On Jan 17, 2010, at 6:58 PM, Sam McCandless wrote: > >> >> On Jan 17, 2010, at 3:28 PM, Mark Savoia wrote: >> >>> I don't get it. It gives you what, the size of the matte board? >>> >>> Mark >>> http://www.stillrivereditions.com >>> >>> On Jan 17, 2010, at 3:55 PM, David Kachel wrote: >>> >>>> i got tired of using pencil and paper for each and every print/matt >>>> combination and spent the last couple of days writing a software >>>> program that does all the work for me. All I have to do is input >>>> the dimensions of the image area, the offsets I want on each side >>>> and the size of the matt board. It spits out the numbers I want in >>>> inches and fractional (1/4, 12, etc.) inches. >>>> >>>> Did I just reinvent the wheel? Is there something else out there >>>> that already does this? I ask because I am wondering if I should >>>> slap a pretty face on the software and sell it for a small fee. >>>>> >>>> >>>> David Kachel >>> > > > > ------------------------------------ > > Please visit the Group Homepage to check the Files, and other > resources as they are often being updated. > > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint > > If you wish to receive no emails or just a daily digest, or you wish > to unsubscribe, please edit your Membership preferences by visiting > this same page. > > Please follow these basic guidelines: > - As threads develop, trim off excess portions of earlier messages > to keep them short. > - Good manners are required at all time. No personal attacks or > flames. Hostile, aggressive or argumentative users may be removed > from the membership without notice. > - Keep your posts and threads related to the group topic of digital > B&W printing. Users who persistently make off-topic posts may be > removed from the membership. > - By posting on this forum you agree to abide by the group rules and > guidelines, and to abide by the actions and decisions of the group > Owner and Moderators. See Group Topic, Rules and Guidelines in the > Files section: > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ > > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE > PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE > OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL > NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, > CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, > DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE > LOSSES (EVEN IF THE OWNER AND MODERATORS OF DIGITAL BW, THE > PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH > DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE > DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR > ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR > CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; > OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO > GROUP. > Yahoo! Groups Links > > > >
Message
Re: [Digital BW] software tool for measuring matts
2010-01-18 by Sam McCandless
Attachments
- No local attachments were found for this message.