Digital BW, The Print

Do you have the new clamps? They go all the way around the 
tubing and have a keyhole shapped hole in them. They do NOT 
have to be folded over.

The old clamps where more of a clothespin device that you 
had to double over the tubing before you put the clamp on.

All I can say is make sure you have clamped the tubing well 
before you disconnect it from the plunger and make sure the 
end of the tubing is well submerged in the ink before you 
remove the clamp.

Jack Kendall





On Sunday 03 February 2002 08:33 pm, you wrote:
> Thanks for your reply. When I begin the process the
> plunger is at the top of the syringe, near the tip, and I
> pull  back on it to begin and then push it forward. 
> There is resistance when I pull the plunger back. I have
> not noticed any movement on the sides of the black cart.
> I have clamped the tube according to the directions on
> the inkjetart.com website.  By folding it over before
> clamping, are you saying that I should "double it over"
> and then clamp?  I look forward to your response.  Mike
>
>