Putting any paper print against glass/glazing that has any chance of sticking is a bad idea. What would make it stick? Coatings, carrier that hasn't completely dried, etc. You are looking at a material that has the ability to absorb moisture and in so doing allowing the material in the paper, on the paper to bond to the glass. Why take the risk? I have a fish tank in the kitchen that I made a quick background for with my 4800 on some Polar Matte from Red River. The tank will leak over the top due to the bubbler. A small build up of moisture in the back near the bottom, not only warped the paper but actually dissolved it. This is extreme and used to illustrate that paper and ink is not a solid object like a stone, bronze, etc. It will breathe a little and it is simply not a good idea to put it in a position to lay against a smooth flat surface under even the lightest of pressure. Eric Neilsen Photography 4101 Commerce Street, Suite 9 Dallas, TX 75226 214-827-8301 http://ericneilsenphotography.com Skype : ejprinter _____ From: DigitalBlackandWhiteThePrint@yahoogroups.com [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of CorrPro96@... Sent: Wednesday, June 06, 2007 9:40 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: Re: [Digital BW] Print contact with glazing material? In a message dated 6/6/2007 9:47:34 A.M. Eastern Daylight Time, e1-fyc7-7hww- <mailto:e1-fyc7-7hww-c9sn%40emailias.com> c9sn@... writes: In Amadou Diallo's excellent book (p. 311), the statement is made "No matter which material you choose, it is important that the print does not come into direct contact with the glazing." Assuming that the print has dried for perhaps a week before framing, why is it important that the print not touch the glazing material? Because it might stick to it. The mat is supposed to provide the space between the glass and the print. Richard (Brooklyn). . <http://geo.yahoo.com/serv?s=97359714/grpId=3702311/grpspId=1705019182/msgId =85959/stime=1181141011/nc1=4543838/nc2=3848602/nc3=3848443> [Non-text portions of this message have been removed]
Message
RE: [Digital BW] Print contact with glazing material?
2007-06-06 by Eric Neilsen Photo
Attachments
- No local attachments were found for this message.