Digital BW, The Print

Yes, W2000 on an HP Vectra 1.5mhz w/ 1.2gb memory.

Regards,

Michael J. Kravit, AIA
Architect/Photographer
www.kravit.net/photography
  ----- Original Message ----- 
  From: Moreno Polloni 
  To: DigitalBlackandWhiteThePrint@yahoogroups.com 
  Sent: Thursday, August 16, 2001 1:45 PM
  Subject: Re: [Digital BW] Printing Large Files - Problems


  > Recently I noticed that if I try to print a large file through the 
  > Epson driver the image gets truncated and only 2/3 of it is printed. 
  > It is almost as if the printer just stops printing.
  > 
  > To clarify, I have a 150mb image with a size of 20x20. I resize w/o 
  > re-sampling to 7x7. The image file size therefore remaims the same. I 
  > convert to RGB, apply the applicable curve and print. At this point 
  > because of the RGB conversion the image size grows.
  > 
  > I print to the 7000. The printer prints 3/4 of or 2/3 of the image 
  > and then stops and ejects the paper.
  > 
  > Has anyone seen this type of behavior? It it a limitation in the 
  > Epson driver?

  You wouldn't by chance be using Windows 2000, would you?


        Yahoo! Groups Sponsor 
       
       

  If you do not wish to belong to Digital B&W, The Print, you may
  unsubscribe by sending an email to:
  DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



[Non-text portions of this message have been removed]