Digital BW, The Print

I only see on decimal point in you list.  If that's the case, these aren't valid LAB values.  And, the last on 10014 can't be a valid value.  What are you reading you test strips with?
   
  *********
  

guy_staley <guy_staley@...> wrote:
          Using the Create ICC program, I'm getting this error, even though I can see no problems 
with my data.

Here's the input text file:

Gray Lab_L 
0 95
5 89
10 85
15 81
20 77
25 74
30 70.5
35 67
40 65
45 62
50 59
55 56
60 54
65 51
70 47
75 44
80 40
85 37
90 30
95 23
100 14

And here's the output text file:

QTR-Create-ICC version 2.4.2.0

File: /Users/guystaley/Desktop/2200_EEM_MHW_Test1-out.txt
Step Dens Lab A B 
0.00 0.000 0.00 0.00 0.00 L b +
25.00 0.000 0.00 0.00 0.00 L b +
50.00 0.000 0.00 0.00 0.00 L b +
75.00 0.000 0.00 0.00 0.00 L b +
100.00 0.000 0.00 0.00 0.00 L b +

The Lab values are not in order.
Cannot make a profile.

This is my first time using this program, and I'm following Paul Roarke's method.

Any suggestions???



         


[Non-text portions of this message have been removed]