Digital BW, The Print

Richard, You may also want to adjust your print quality and dry time. If the
banding is not file related, then adjustments to the printer may get rid of
them. Is this a normal size print for you? Sometimes techniques used at one
print size don't work so well at other print sizes.  Good luck.

 

Eric 

 

Eric Neilsen Photography

4101 Commerce Street

Suite 9

Dallas, TX 75226

http://e.neilsen.home.att.net

http://ericneilsenphotography.com

Skype ejprinter

  _____  

From: DigitalBlackandWhiteThePrint@yahoogroups.com
[mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of Daniel
Staver
Sent: Wednesday, November 22, 2006 2:52 AM
To: DigitalBlackandWhiteThePrint@yahoogroups.com
Subject: RE: [Digital BW] banding despite clear nozzle check

 

Try various head alignment settings. The horizontal alignment is notoriously
difficult to get right. My horizontal alignment sheet shows so much banding
it's impossible to tell which of the boxes are best aligned. I remember
Clayton had good results with the lower settings (1-2) in spite of obvious
gaps on the alignment sheet.

I'm not sure if you have to go through the whole alignment process after the
horizontal alignment. The color alignment is slow and tedious to go through.

Also try both the thick and normal paper settings. Sometimes on of them will
have banding while the other is fine.

--
Daniel Staver
http://daniel. <http://daniel.staver.no> staver.no

> I'm doing some proofs before a large mural on my 2100 ... 
> they have started to show banding in spite of a clear nozzle check.
> 
> What should I do next????

 



[Non-text portions of this message have been removed]