Digital BW, The Print

I could be wrong but I've a network card in my 4000. I had to default  
it to factory (printer off, unplug it, hold in small button on card,  
plug power back in). After that it had a network address like a  
router (192.168.2.1) and could be accessed over ethernet cable from a  
browser.

Hope I remembered that correctly because all I did then was change  
the last quartet (last 3 numbers) to something that wouldn't conflict  
with the 3 computers, 2 printers and 2 routers.

Alan

On Nov 15, 2006, at 12:19 PM, dlruckus wrote:

> Hi Daniel.
> I have the 3000 and the card and the network manual for it.
> Unfortunately they are all in Ohio and I am not. However, if someone
> here has the info for the 7000/7500 it should be the same method since
> the card will also work with those machines. As I recall, not
> necessarily very well, I think you address the card over the net
> itself to change its settings. I suspect the command structure is
> similar if not the same for the larger machines.
>
> If you don't get help before Xmas, I will be in Ohio for a couple of
> days over the holiday and can get the info for you then.
>
> Regards
> Duane