Digital BW, The Print

On 8/5/06, Johnny Eades <jeades1@...> wrote:
> I have a complete set of MIS K4
> refillable carts to replace them with. My question is should I remove
> all of the initial Epson carts and replace them with the MIS carts or
> replace them separately as they need replacing?

Hi Johnny, I have the same setup. I replaced all at the same time for 2 reasons:

1. I didn't want to reprofile. (I dislike that particular chore.) I
ran a purge pattern after the K4 carts were installed and before I
built the profiles.
2. I wanted to keep a set of OEM inks on hand in case I ran into
quality problems. I actually replaced my set a little before I needed
to for this reason. I taped the exit ports and sealed them in a
baggie. I learned to do this when running 3rd party inks and a CIS in
an 1160 that was prone to a variety of ailments that were hard to
diagnose.

I find the K4 inks to be quite good once profiles are in place. And
very very few clogs. I love this printer.

Linda