Digital BW, The Print

> ... When
> printing what do I select for a profile? Assuming I have applied one
> of Pauls curves and set the No Color Adj and Photo Paper. 

After applying the curve to an Adobe RGB file, in Print Preview use "No
Color Management" (CS2) or "Same as Source" (older versions) in the Color
management section.  Be sure there are no embedded profiles.  In the driver
"No Color Adjustment" is also used.  

So, the main thing to know about the usual color printing profiles is to be
sure there are no embedded profiles in the file.  

In the Control Panel, Printers and Faxes, 1280 Properties, Color Management
I leave it at the default.  In mine the "Automatic" is checked and "EE151_1"
is the profile associated with the printer.

Hope this answers the question.

Paul
www.PaulRoark.com