Digital BW, The Print

I assume that is the cyan ramp you printed.  It indicates the LC is missing.
Are you sure your nozzle checks are OK?

Paul
www.PaulRoark.com 


> -----Original Message-----
> From: DigitalBlackandWhiteThePrint@yahoogroups.com
> [mailto:DigitalBlackandWhiteThePrint@yahoogroups.com] On Behalf Of
> chwhitaker
> Sent: Monday, January 16, 2006 2:06 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: MIS UT2 Carbon prints very non-linear
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Paul Roark"
> <paul.roark@v...> wrote:
> >
> > I'm not sure a too-dark LC would cause the problem you're having,
> but it's
> > possible.  Try printing an RGB 21-step test strip with only the red
> curve at
> > its default position, and the green and blue curves horizontal --
> i.e., the
> > magenta and yellow inks turned off.  On the monitor the RGB image
> will be
> > cyan.  With No Color Adjustment selected in the driver, the ramp
> will show
> > if the LC is way to dark -- the ramp will be awful.  (If you don't
> know how
> > to make this curve, let me know and I'll send one off list.)
> >
> > Paul
> > www.PaulRoark.com
> 
> Finally got the curves you described. The results are at
> http://www.charles.whitaker.name/NoGreenNoBlue.jpg. Do these results
> support a very dark light cyan? Thanks.
> 
> 
> 
> 
> 
> Please visit the Group Homepage to check the Files, and other resources as
> they are often being updated.
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> If you wish to receive no emails or just a daily digest, or you wish to
> unsubscribe, please edit your Membership preferences by visiting this same
> page.
> 
> Please follow these basic guidelines:
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - Good manners are required at all time. No personal attacks or flames.
> Hostile, aggressive or argumentative users may be removed from the
> membership without notice.
> - Keep your posts and threads related to the group topic of digital B&W
> printing. Users who persistently make off-topic posts may be removed from
> the membership.
> - By posting on this forum you agree to abide by the group rules and
> guidelines, and to abide by the actions and decisions of the group Owner
> and Moderators. See "Group Topic, Rules and Guidelines" in the Files
> section:
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> 
> BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT
> YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" AND
> "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO
> YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
> EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
> PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE
> "OWNER" AND "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN
> ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE
> OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii)
> UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii)
> STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT
> YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE
> PRINT YAHOO GROUP.
> 
> Yahoo! Groups Links
> 
> 
> 
>