Digital BW, The Print

No.  The carts I use have a primary filling chamber with a stopper and
another air intake/sill chamber.  This plug is removed when the inks are
loaded.  The primary filling chamber must be very tightly sealed.  The plus
are rubber rather than plastic which I think helps the seal.


> From: Carl Schofield <scho@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Sat, 14 Jan 2006 14:56:08 -0500
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] sponge or spongeless carts for the 2200
> 
> Steve,
> 
> I'm using the MIS spongeless carts in my 2400 and refilling with the
> K4 inks.  Recently I've been getting occasional blobs or drops of
> inks deposited on the print, usually at the start of a print run.  I
> think it might be accumulated leakage from the cart(s) but don't know
> where they are leaking.  Have you seen this problem at all?
> 
> Carl