Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "byushooter" 
<jellerbe@j...> wrote:
>
> Thanks for the help guys.  I tried head cleanings again today 
> without any luck.  No ink would move through the nozzle at all.  I 
> took the cover off the print head, removed the tube from the 
> connection and pulled the ink through to get to the flush fluid.  
> Then I tried squirting some windex through the connector on the 
> print head but don't know how successful I was with that since I 
> didn't have a good fit.  I put it all back together and did one 
more 
> head cleaning and got some ink flow!  I have now printed a few 
purge 
> prints using that one nozzle and the flush cartridge.  There is 
some 
> banding but it least it's something.  I plan on letting that sit 
for 
> a while then doing another nozzle check.


Don't forget to use the other colors too, you don't want those to 
clog up while you concentrate on the problem color. Since you had an 
unused "color", would it make sense to leave the cleaning cart 
installed where it is, and remap that color to the other head? Then 
you could go on printing while you are waiting for the cleaning fluid 
to do it's job. But this may be more work than it's worth.