Digital BW, The Print

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "edrudolpho" 
<erudolph@p...> wrote:
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy Harrington" 
<roy@h...> 
> wrote:
> > 
> 
> > > Let me make sure I've got this correct.  The first step in the calibration process 
is 
> > now to 
> > > print the inkseparation file using the following setup:
> > > 
> > > ModeL  QuadTone RIP Calibration
> > > Curve 1: None
> > > Curve 2: None
> > > Tone Blend 100-0
> > > Ink Limit Adj 0
> > > Gamma Adj 0
> > > 
> 
> Roy, when I print a calibration file with the above setup, I'm getting all black ink, no 
toned 
> inks at all.  I understand the ink limit calibration process from doing it in QTR 2.2, 
so I was 
> surprised to be getting this all black step wedges on a dark gray background.  
> 
> Ed

This sounds like the symptoms you get when the Calibration mode is NOT
set and you print the inkseparation page.  The OS always resets this mode
so you have to check it each time you print.

Roy