Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] Qtr

2005-03-07 by Roy Harrington

Hi Nick,

The output shows all things OK.   There aren't errors or missing messages.
It just ends with the print job cancelled presumably by you.

The lights that you are getting sure look like a mechanical problem.
I have a 2200 not a 2100 but the manual has a Solving Problems chapter
that goes though all the combinations of red and green lights, on, off and
flashing.  All the explanations are ink, paper and feed related.  Is the paper
too heavy, too many sheets, roll vs sheet vs manual slot?  Try ordinary sheets
EEM paper, letter size (or A4).

The output shows you printed via the Epson driver immediately before.
Did that complete OK?  Same paper, size, feed, etc??

Roy

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, nickmt <nickmt@o...> 
wrote:
> Unfortunately not again ­ still....
> 
> Using 1440 super, matte paper, tabloid size.  P2100 false starts then red
> light goes on, print never spools past 40%.
> 
> Here is the diagnostic.
> 
> Last login: Sun Mar  6 16:38:09 on ttyp1
> /Volumes/QTRIP2.1/DiagnosticScript.command; exit
> Welcome to Darwin!
> Nicholas-Kuskins-Computer:~ nicholaskuskin$
> /Volumes/QTRIP2.1/DiagnosticScript.command; exit
> 
> ********************************************************************
> 
> **** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****
> 
> ********************************************************************
> 
> Sun Mar  6 16:43:16 EST 2005
> 
> **** Printer Info ****
> scheduler is running
> system default destination: Quad2100
> device for Quad2100:
> usb://EPSON/Stylus%20Photo%202100?serial=L53030211280858300
> device for Stylus_Photo_2100: ///dev/null
> Quad2100 accepting requests since Jan 01 00:00
> Stylus_Photo_2100 accepting requests since Jan 01 00:00
> printer Quad2100 disabled since Jan 01 00:00 -
>         Paused
> printer Stylus_Photo_2100 is idle.  enabled since Jan 01 00:00
>         kPMEventJobProgress:1 1 1 1 1 1 96
> 
> **** QTR Programs ****
> -rwxr-xr-x  1 nicholas  nicholas  21668  2 Jun  2004 /usr/local/bin/qacv
> -rwxr-xr-x  1 nicholas  nicholas  20684  2 Jun  2004 /usr/local/bin/qacvraw
> -rwxr-xr-x  1 nicholas  nicholas  20340  2 Jun  2004 /usr/local/bin/qadd
> -rwxr-xr-x  1 nicholas  nicholas  20472  2 Jun  2004 /usr/local/bin/qcurve
> -rwxr-xr-x  1 nicholas  nicholas  20088  2 Jun  2004 /usr/local/bin/qdensity
> -rwxr-xr-x  1 nicholas  nicholas  16196  2 Jun  2004 /usr/local/bin/qdiff
> -rwxr-xr-x  1 nicholas  nicholas  19688  2 Jun  2004 /usr/local/bin/qdotgain
> -rwxr-xr-x  1 nicholas  nicholas  19472  2 Jun  2004 /usr/local/bin/qgamma
> -rwxr-xr-x  1 nicholas  nicholas  19652  2 Jun  2004 /usr/local/bin/qgraph
> -rwxr-xr-x  1 nicholas  nicholas  19432  2 Jun  2004 /usr/local/bin/qlimit
> -rwxr-xr-x  1 nicholas  nicholas  14836  2 Jun  2004 /usr/local/bin/qline
> -rwxr-xr-x  1 nicholas  nicholas  20560  2 Jun  2004 /usr/local/bin/qmerge
> -rwxr-xr-x  1 nicholas  nicholas  22644  2 Jun  2004 /usr/local/bin/qpart
> -rwxrwxrwx  1 nicholas  nicholas  23376  1 Mar  2004 /usr/local/bin/qpart2
> -rwxr-xr-x  1 nicholas  nicholas  19404  2 Jun  2004 /usr/local/bin/qplot
> -rwxr-xr-x  1 nicholas  nicholas  20524  2 Jun  2004 /usr/local/bin/qspline
> -rwxr-xr-x  1 nicholas  nicholas   2974  2 Jun  2004
> /usr/local/bin/quadcurves
> -rwxr-xr-x  1 nicholas  nicholas   9952  2 Jun  2004
> /usr/local/bin/quadprofile
> -rwxr-xr-x  1 nicholas  staff     30672  5 Dec  2003
> /usr/local/bin/quadraster
> -rwxr-xr-x  1 nicholas  staff        2242  6 Mar 13:22
> /usr/libexec/cups/filter/quadrastertoprinter
> -rwxrwxrwx  1 nicholas  nicholas     2094  3 Sep  2004
> /usr/libexec/cups/filter/quadtoneprint
> -rwxr-xr-x  1 nicholas  nicholas  1177356 20 Sep 19:46
> /usr/libexec/cups/filter/quadtoprinter
> total 0
> drwxr-xr-x  3 nicholas  nicholas  102  6 Mar 16:37 QuadTone.plugin
> 
> **** QTR Printer Descriptions ****
> -rw-r--r--  1 nicholas  staff     8316  8 Dec  2003
> /usr/share/cups/model/C/escp2-10000-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2833 19 Sep 15:44
> /usr/share/cups/model/C/escp2-1160-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2902 19 Sep 15:44
> /usr/share/cups/model/C/escp2-1200-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2902 19 Sep 15:44
> /usr/share/cups/model/C/escp2-1270-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2916 19 Sep 15:44
> /usr/share/cups/model/C/escp2-1280-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2914 19 Sep 15:44
> /usr/share/cups/model/C/escp2-1290-quad.ppd.gz
> -rw-r--r--  1 nicholas  staff     8361  8 Dec  2003
> /usr/share/cups/model/C/escp2-1520-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2837 19 Sep 15:44
> /usr/share/cups/model/C/escp2-2000-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2937 19 Sep 15:44
> /usr/share/cups/model/C/escp2-2100-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2937 19 Sep 15:44
> /usr/share/cups/model/C/escp2-2200-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2796 19 Sep 15:44
> /usr/share/cups/model/C/escp2-3000-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2892 19 Sep 15:44
> /usr/share/cups/model/C/escp2-4000-quad.ppd.gz
> -rw-r--r--  1 nicholas  staff     8228  8 Dec  2003
> /usr/share/cups/model/C/escp2-5000-quad.ppd.gz
> -rw-r--r--  1 nicholas  staff     8434  8 Dec  2003
> /usr/share/cups/model/C/escp2-5500-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3060 19 Sep 15:44
> /usr/share/cups/model/C/escp2-7000-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3061 19 Sep 15:44
> /usr/share/cups/model/C/escp2-7500-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3089 19 Sep 15:44
> /usr/share/cups/model/C/escp2-7600-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2514 19 Sep 15:44
> /usr/share/cups/model/C/escp2-860-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2582 19 Sep 15:44
> /usr/share/cups/model/C/escp2-870-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2594 19 Sep 15:44
> /usr/share/cups/model/C/escp2-890-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3189 19 Sep 15:44
> /usr/share/cups/model/C/escp2-9000-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3190 19 Sep 15:44
> /usr/share/cups/model/C/escp2-9500-quad.ppd.gz
> -rw-r--r--  1 nicholas  staff     7455  8 Dec  2003
> /usr/share/cups/model/C/escp2-960-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  3218 19 Sep 15:44
> /usr/share/cups/model/C/escp2-9600-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2515 19 Sep 15:44
> /usr/share/cups/model/C/escp2-980-quad.ppd.gz
> -rw-r--r--  1 nicholas  nicholas  2712 19 Sep 15:44
> /usr/share/cups/model/C/escp2-ex-quad.ppd.gz
> 
> **** USB connections ****
> -r-xr-xr-x  1 root  wheel  41864  2 Mar 19:58 /usr/libexec/cups/backend/usb
> direct usb "Unknown" "USB Printer (usb)"
> direct usb://EPSON/Stylus%20Photo%202100?serial=L53030211280858300 
"EPSON
> Stylus Photo 2100" "Stylus Photo 2100"
> 
> **** CUPS Info ****
> I [06/Mar/2005:16:32:59 -0500] Setting Stylus_Photo_2100
> printer-is-accepting-jobs to 1 (was 0.)
> I [06/Mar/2005:16:32:59 -0500] Setting Stylus_Photo_2100 printer-state to 3
> (was 5.)
> I [06/Mar/2005:16:32:59 -0500] Saving printers.conf...
> I [06/Mar/2005:16:32:59 -0500] New printer 'Stylus_Photo_2100' added by ''.
> I [06/Mar/2005:16:34:23 -0500] Adding start banner page "none" to job 1.
> I [06/Mar/2005:16:34:23 -0500] Adding end banner page "none" to job 1.
> I [06/Mar/2005:16:34:23 -0500] Job 1 queued on 'Stylus_Photo_2100' by
> 'nicholaskuskin'.
> I [06/Mar/2005:16:34:23 -0500] Started filter
> /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr
> (PID 347) for job 1.
> I [06/Mar/2005:16:38:10 -0500] Saving printers.conf...
> I [06/Mar/2005:16:38:10 -0500] New printer 'Quad2100' added by ''.
> I [06/Mar/2005:16:38:10 -0500] Setting Quad2100 device-uri to
> "usb://EPSON/Stylus%20Photo%202100?serial=L53030211280858300" (was
> "file:///dev/null".)
> I [06/Mar/2005:16:38:10 -0500] Saving printers.conf...
> I [06/Mar/2005:16:38:10 -0500] Printer 'Quad2100' modified by ''.
> I [06/Mar/2005:16:38:10 -0500] Setting Quad2100 printer-is-accepting-jobs to
> 1 (was 0.)
> I [06/Mar/2005:16:38:10 -0500] Setting Quad2100 printer-state to 3 (was 5.)
> I [06/Mar/2005:16:38:10 -0500] Saving printers.conf...
> I [06/Mar/2005:16:38:10 -0500] Printer 'Quad2100' modified by ''.
> I [06/Mar/2005:16:38:23 -0500] Saving printers.conf...
> I [06/Mar/2005:16:38:23 -0500] Printer 'Quad2100' modified by ''.
> I [06/Mar/2005:16:42:19 -0500] Adding start banner page "none" to job 2.
> I [06/Mar/2005:16:42:19 -0500] Adding end banner page "none" to job 2.
> I [06/Mar/2005:16:42:19 -0500] Job 2 queued on 'Quad2100' by
> 'nicholaskuskin'.
> I [06/Mar/2005:16:42:19 -0500] Started filter
> /usr/libexec/cups/filter/cgpdftoraster (PID 1864) for job 2.
> I [06/Mar/2005:16:42:19 -0500] Started filter
> /usr/libexec/cups/filter/quadtoneprint (PID 1865) for job 2.
> I [06/Mar/2005:16:42:19 -0500] Started backend /usr/libexec/cups/backend/usb
> (PID 1866) for job 2.
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : QuadToneRIP: using curve
> UC-EEnhMatte-cool
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : QuadToneRIP: using curve
> UC-EEnhMatte-warm
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : HWResolution = [ 1440 720 ]
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : ImagingBoundingBox = [ 9 40 774
> 1175 ]
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : Margins = [ 0 0 ]
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : PageSize = [ 792 1224 ]
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : cupsWidth = 15480
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : cupsHeight = 11750
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : stp_get_resolution(v) |1440super|
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : stp_get_dither_algorithm(v)
> |Ordered|
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : GIMP-PRINT w=792 l=9 r=783  h=1224
> t=1215 b=40
> N [06/Mar/2005:16:42:20 -0500] [Job 2] : GIMP-PRINT w=15480 l=180 r=180
> h=11750 t=90 b=400
> I [06/Mar/2005:16:43:06 -0500] Saving printers.conf...
> I [06/Mar/2005:16:43:06 -0500] Printer 'Quad2100' stopped by ''.
> I [06/Mar/2005:16:43:07 -0500] Job 2 was cancelled by 'nicholaskuskin'.
> 
> ********************************************************************
> 
> **** QuadToneRIP Diagnostic Script --- Save Output for Analysis ****
> 
> ********************************************************************
> 
> logout
> [Process completed]
> 
> 
> 
> On 3/6/05 4:10 PM, "Steve Kale" <stevekale@b...> wrote:
> 
> > Again - which dpi?  Make sure you are not using 2880 - use 1440 super.  Also
> > post the output from the Diagnostic Script so that guys like Roy can helkp
> > you.
> > 
> > 
> >> > From: nickmt <nickmt@o...>
> >> > Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> >> > Date: Sat, 05 Mar 2005 18:43:29 -0500
> >> > To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> >> > Subject: [Digital BW] Qtr
> >> > 
> >> > 
> >> > Dear All.
> >> > 
> >> > I've installed panther, and all the drivers to support Epson 2100.  It runs
> >> > fine.
> >> > 
> >> > I've installed qtr and it won't run at all.  It only spools.
> >> > 
> >> > This is slightly different from previous symptoms.  I am so beaten down by
> >> > all the work I've done I don't even know what else to say.. Help?
> >> > 
> >> > N
> >> > 
> >> > 
> > 
> > 
> > 
> > 
> > Please visit the Group Homepage to check the Files, and other resources as
> > they are often being updated.
> > 
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> > 
> > If you wish to receive no emails or just a daily digest, or you wish to
> > unsubscribe, please edit your Membership preferences by visiting this same
> > page.
> > 
> > Please follow these basic guidelines:
> > - As threads develop, trim off excess portions of earlier messages to keep
> > them short.
> > - Good manners are required at all time. No personal attacks or flames.
> > Hostile, aggressive or argumentative users may be removed from the 
membership
> > without notice.
> > - Keep your posts and threads related to the group topic of digital B&W
> > printing. Users who persistently make off-topic posts may be removed from the
> > membership.
> > - By posting on this forum you agree to abide by the group rules and
> > guidelines, and to abide by the actions and decisions of the group Owner and
> > Moderators. See "Group Topic, Rules and Guidelines" in the Files section:
> > http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/
> > 
> > BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE 
PRINT
> > YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE "OWNER" 
AND
> > "MODERATORS" OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE 
TO YOU
> > FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 
EXEMPLARY
> > DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, 
GOODWILL,
> > USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE  "OWNER" AND 
"MODERATORS" OF
> > DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY 
OF SUCH
> > DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL 
BW,
> > THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF 
YOUR
> > TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY 
ON THE
> > DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING 
TO THE
> > DIGITAL BW, THE PRINT YAHOO GROUP.
> > 
> > 
> > 
> > Yahoo! Groups Sponsor
> >  
> >  ADVERTISEMENT
> >  
> > <http://us.ard.yahoo.com/SIG=129anc5a5/
M=298184.6018725.7038619.3001176/D=grou
> > ps/S=1705019182:HM/EXP=1110229870/A=2593423/R=0/SIG=11el9gslf/
*http://www.netf
> > lix.com/Default?mqso=60190075>
> > 
> > 
> > Yahoo! Groups Links
> > * To visit your group on the web, go to:
> > * http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/
> > *  
> > * To unsubscribe from this group, send an email to:
> > * DigitalBlackandWhiteThePrint-unsubscribe@yahoogroups.com
> > <mailto:DigitalBlackandWhiteThePrint-
unsubscribe@yahoogroups.com?subject=Unsub
> > scribe> 
> > *  
> > * Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> > <http://docs.yahoo.com/info/terms/> .
> > 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.