Digital BW, The Print

Excellent, thanks for the advice. I'm in Colorado, and inside,
so it's dry and warm where I'm spraying. I have some older 
fully-dry prints I can practice on, to eliminate that variable.

Sounds like I need to shake longer and get closer. Thanks 
John and Nick---I'll try both your suggestions. Reassuring
to know this can be mastered.

-david

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "john dean"
<deanwork2003@y...> wrote:
> 
> Also make sure these prints are fully dried and hardened before you
spray them. Especially 
> with rc prints is this important. This spray does not work well in
cold or excessively humid 
> environments. Also I shake the cans for a minute before use. I have
sprayed hundreds of 
> huge prints and canvas pieces with this stuff ( with a mask ) and
never have I ruined a 
> print because of a problem with the spray, either Lyson or Premier
Art.
> 
> john
> 
> > Hi David,
> > 
> > Spraying from 20 inches away is a little too far. You need to
come 
> > closer. Don't they suggest 8-12 inches? Even 12 inches is still a 
> > little further than ideal. At 20 inches the spray will fall on
the 
> > print like powder and feel gritty to the touch. Try 8 inches.
You'll 
> > just have to practice with a few cans before you get consistent 
> > results.
> > 
> > --nick
> >