Digital BW, The Print

Agreed.  I have a problem with 2880dpi also, but 1440 works okay, as 
long as I use a predefined paper size.  Custom paper sizes bomb on 
2.1.7 and cause the paper to feed through and generate a printer feed 
error.  Win XP with a 2200.  

Lou

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Roy" 
<rjjp@r...> wrote:
> 
> 
> FYI:
> 
> Ran cleanout program, downloaded QTR 2.1c, then QTRgui 2.1.8.
> 
> Still will not print [@2800] but will print @1440 [???]
> 
> Something to add to the stew..
> 
> PS, the prints are great !
> 
> Regards, Roy
> 
> 
> 
> 
> 
> "Followed your advice and still won't print if image is on d: 
Copied image
> to c: and prints fine. Can live with that. It did clean out all the 
old
> links and installed in the correct folder now. Don't know where
> theQuadTonePCbeta3 came from.
> 
> Thanks for the attention to the problem. Hope you get to enjoy the 
holiday
> and don't spend it debugging..
> 
> Thanks
> 
> Bill"
> 
> ----- Original Message -----
> 
> From: Stephen Billard
> 
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> 
> Sent: Thursday, December 30, 2004 5:55 PM
> 
> Subject: [Digital BW] QTR anguish
> 
> 
> 
> I have some (perhaps) good news.
> 
> While testing the cleanup program I was able to experience the 
problems some
> 
> of you have been having--Printing but nothing happens. If you have 
DEBUG
> 
> set, the Command window flashes by.
> 
> I think that something must be wrong in the copy of QTRgui 2.1.7 
that is in
> 
> the QuadToneRIP version 2.1c. I have created what should be the 
same thing,
> 
> but called it version 2.1.8 and posted it on
> 
> www.sbillard.org/Shareware/QTRgui.htm. So far I haven't seen the 
problem
> 
> with this copy. The only concern I have is that the problem with 
the other
> 
> 2.1.7 copy was not persistent and I can't figure out what was 
different when
> 
> it worked from when it did not.
> 
> I still recommend you run the cleanout program and start with a 
fresh
> 
> install of QuadToneRIP 2.1c. Then install QTRgui 2.1.8 over top of 
that
> 
> install.
> 
> -Stephen
> 
> www.sbillard.org/Stephen
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]