Digital BW, The Print

FYI:

Ran cleanout program, downloaded QTR 2.1c, then QTRgui 2.1.8.

Still will not print [@2800] but will print @1440 [???]

Something to add to the stew..

PS, the prints are great !

Regards, Roy





"Followed your advice and still won't print if image is on d: Copied image
to c: and prints fine. Can live with that. It did clean out all the old
links and installed in the correct folder now. Don't know where
theQuadTonePCbeta3 came from.

Thanks for the attention to the problem. Hope you get to enjoy the holiday
and don't spend it debugging..

Thanks

Bill"

----- Original Message -----

From: Stephen Billard

To: DigitalBlackandWhiteThePrint@yahoogroups.com

Sent: Thursday, December 30, 2004 5:55 PM

Subject: [Digital BW] QTR anguish



I have some (perhaps) good news.

While testing the cleanup program I was able to experience the problems some

of you have been having--Printing but nothing happens. If you have DEBUG

set, the Command window flashes by.

I think that something must be wrong in the copy of QTRgui 2.1.7 that is in

the QuadToneRIP version 2.1c. I have created what should be the same thing,

but called it version 2.1.8 and posted it on

www.sbillard.org/Shareware/QTRgui.htm. So far I haven't seen the problem

with this copy. The only concern I have is that the problem with the other

2.1.7 copy was not persistent and I can't figure out what was different when

it worked from when it did not.

I still recommend you run the cleanout program and start with a fresh

install of QuadToneRIP 2.1c. Then install QTRgui 2.1.8 over top of that

install.

-Stephen

www.sbillard.org/Stephen















[Non-text portions of this message have been removed]