Digital BW, The Print

To be honest I have found the whole B&W on RC paper printing a frustration.
There's bronzing and differential reflectance issues.  Spraying (I have used
Lyson Print Guard) helps but then you have the issue of mottled blacks.  I
have not found a solution and am a bit surprised that others don't seem
bothered by the issue you and I are experiencing - I have raised this issue
here before.  As a result, I have not done much RC printing of late.  In my
experience, these issues are significantly less in colour work.  As a result
I would like to understand a little better what actually causes these issues
and why it might be that a spray helps.  (I am using a 2100 with an MIS CFS
with their UC equivalent inks.)


> From: Steve Schaefer <steve_schaefer@...>
> Reply-To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Date: Tue, 26 Oct 2004 07:06:38 -0400 (GMT-04:00)
> To: <DigitalBlackandWhiteThePrint@yahoogroups.com>
> Subject: Re: [Digital BW] Premier Art Print
> 
> 
> Steve have you found another method or do you just not us it?
>