Just to insert my 2 cents' worth regarding auto cutting -- As noted, below, the Epson large-format roll paper cutters don't work well on thick paper. I use it to cut EEM on my 7500, but not my UltraSmooth roll paper. I really like that cutting feature for roll papers. So, for that and other reasons, a thick roll paper has some disadvantages. The thought that PremierArt 205 might be a paper that has the UltraSmooth coating and is more likely to be easily cut by my 7500 is one reason I thought that paper deserved very close examination. (Way lower cost also figures in my calculations.) Paul www.PaulRoark.com ______________________________________ -----Original Message----- From: Ron Hornbaker [mailto:ron@...] Sent: Wednesday, September 22, 2004 10:16 AM To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] Can ultrasmooth be autocut in Epson 4000? (was: 7600 roll paper gimp) > By the way, you don't want to use the cutter on the nice thick fine > art papers anyway. They dull the blade after only a few cuts. It was > designed for Epson's normal flimsy stuff. > Tyler I know that's the Epson party line, but can others confirm that cutting a paper like Epson Ultrasmooth on a 17" roll with the 4000's autocut mechanism will quickly wear out the blade? It seems to do a great job on the few prints I've used it for, and cutting roll paper by hand is such a hassle - straight edges are impossible. Thanks, Ron Please visit the Group Homepage to check the Files, and other resources as they are often being updated. http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest, or you wish to unsubscribe, please edit your Membership preferences by visiting this same page. Please follow these basic guidelines: - As threads develop, trim off excess portions of earlier messages to keep them short. - Good manners are required at all time. No personal attacks or flames. Hostile, aggressive or argumentative users may be removed from the membership without notice. - Keep your posts and threads related to the group topic of digital B&W printing. Users who persistently make off-topic posts may be removed from the membership. - By posting on this forum you agree to abide by the group rules and guidelines, and to abide by the actions and decisions of the group Owner and Moderators. See Group Topic, Rules and Guidelines in the Files section: http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint/files/ BY PARTICIPATING IN AND/OR POSTING MESSAGES TO THE DIGITAL BW, THE PRINT YAHOO! GROUP YOU EXPRESSLY UNDERSTAND AND AGREE THAT THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA OR OTHER INTANGIBLE LOSSES (EVEN IF THE OWNER AND MODERATORS OF DIGITAL BW, THE PRINT YAHOO GROUP HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM: (i) THE USE OR THE INABILITY TO USE THE DIGITAL BW, THE PRINT YAHOO GROUP; (ii) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA; (iii) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE DIGITAL BW, THE PRINT YAHOO GROUP; OR (iv) ANY OTHER MATTER RELATING TO THE DIGITAL BW, THE PRINT YAHOO GROUP. Yahoo! Groups Links
Message
RE: [Digital BW] Can ultrasmooth be autocut in Epson 4000? (was: 7600 roll paper gimp)
2004-09-22 by Paul Roark
Attachments
- No local attachments were found for this message.