Digital BW, The Print

Through the back. The 2200 I have recommends the manual feed slot for
velvet fine art which is a lowly 260gsm. So a heavier 380 is way more.
It's not that hard, after moving the lever, push the paper in until
you see a half inch or so and hold it against the right edge of the
slot. There is enough of an edge in there that you can rock the paper
and you can feel it when it is square. Then while holding the paper
raise the lever 2 notches and you're ready.


--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "yaakovsinclair"
<sinclair@a...> wrote:
> I just got some heavier German Etching (380 gsm?), can I feed it 
> through the top slot or do I need to go in through the back?  (Which 
> seems a little complicated from the help menu)
> thanks!
> Yaakov Asher Sinclair