Digital BW, The Print

My alignment is good, but I've never cleaned the transport mechanism. Do you
know how to make the sheet sticky? Did I hear someone say they sprits a
sheet of paper with Windex and run it through? You think lubing the
head-travel bar would help??

Todd

> I'm assuming that you have anally checked your alignment? And its perfect
> under a loupe.  I think I also remember something about keeping the paper
> transport clean...maybe with sticky cleaning sheets?
> 
> Robert
> 
> On 10/15/01 10:51 PM, "Todd Flashner" <tflash@...> wrote:
> 
>> I'm getting microbanding from my 1160 with the Epson driver. Is there a
>> cure?
>> 
>> Todd
>> 
>> 
>> 
>> Please visit the Group Homepage to check the Files, Bookmarks, Polls and
>> other
>> resources as they are often being updated. The page is at:
>> 
>> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
>> 
>> Please follow these basic guidelines:
>> - Include your full name with your message.
>> - Include the address of your website, if you have one.
>> - As threads develop, trim off excess portions of earlier messages to keep
>> them short.
>> - As the topic of a thread changes remember to change the subject header.
>> - Good manners are required at all time. No personal attacks or "flames."
>> - Complete your Yahoo profile.
>> - Before posting a question, search the message archives and the various
>> resources on the homepage.
>> 
>> 
>> 
>> 
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>> 
>> 
> 
> ----------------------
> Robert Morrison
> rmorrison@...
> 
> 310-397-2704
> 
> 4131 Bledsoe Ave.
> Los Angeles, CA 90066
> 
> 
> Please visit the Group Homepage to check the Files, Bookmarks, Polls and other
> resources as they are often being updated. The page is at:
> 
> http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint
> 
> Please follow these basic guidelines:
> - Include your full name with your message.
> - Include the address of your website, if you have one.
> - As threads develop, trim off excess portions of earlier messages to keep
> them short.
> - As the topic of a thread changes remember to change the subject header.
> - Good manners are required at all time. No personal attacks or "flames."
> - Complete your Yahoo profile.
> - Before posting a question, search the message archives and the various
> resources on the homepage.
> 
> 
> 
> 
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> 
>