Digital BW, The Print

You may be exceeding some maximum allowable bottom margin, or need to
go in and see if that can be set somewhere. So even though it's done
with the image it's looking for more paper. StudioPrint does that too
if everything isn't set right. Or it's just a bug.

"When I do this it doesn't work".
Typical tech support answer-
"Well why would you want to do that that?"
Sounds like an old Roney Dangerfield joke and not that funny any more.
Of course people use sheets in all these printers.
Tyler

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Robbe Gibson"
<videocinema@s...> wrote:
> Hi,
> I have been testing Colorburst with a 7600UC for the last 10 days.
> Grayscale images look good. Everything prints much faster. The
> difficulty I'm having is with sheet paper feed. After printing the image
> and removing the sheet, one inserts a new sheet of paper. When the paper
> loads, it then continues through the printer as if there's more image to
> print. If I set the paper size to 8"x10" or 10.1" and use the 'center
> image' choice, there's no 'double print' problem except the image isn't
> really centered because the paper size is wrong. I've also tried the
> 'offset image top and side' choice. That produces a perfectly centered
> image but the 'double print' problem is still there.  Joshua at
> Colorburst said I'm the first person he's heard of that uses a 7600 with
> sheet paper.(?)
> 
> I have no feed problems using Colorburst with roll paper.
> 
> I have no feed problems using roll or sheet paper with the Epson driver.
> 
> Anybody have any ideas?
> 
> Robbe Gibson
> 
> -----Original Message-----
> From: Antonis [mailto:antonisphoto@y...] 
> Sent: Monday, January 26, 2004 9:15 AM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com
> Subject: [Digital BW] Re: Colorburst RIP
> 
> Steve,
> 
> thanks for sharing that. I wonder why the 2200 would have these problems
> 
> when the large machine works fine. 
> Didn't the 8-pass slow things down too much?
> 
> Antonis
> 
> 
> --- In DigitalBlackandWhiteThePrint@yahoogroups.com, Steve Smith 
> <photosmith@v...> wrote:
> >  I have recently down loaded the trial version of the color burst rip
> and
> > similar problems with banding on grayscale images on the 2200. The
> grayscale
> > images printed on the 9600 were some of the best I have ever seen.
> Color on
> > both machines exhibited banding in the shadows until I set the printer
> to
> > its highest rez ( 8 passes ) it then went away and looked very good. I
> > couldn't get rid of the banding for gray scale on the 2200 but I am
> very
> > impressed with the performance of the 9600.
> > 
> > Steve Smith