There have been claims made that dynamic range and bit depth are not related. That is not true. They absolutely ARE related, and this explains why. What these claim perhaps mean, is that because a certain scanner uses, say, 14 bits, that the dynamic range of that scanner is not necessarily 4.2. That is an absolutely true statement, but that does not mean they are not related. It take just so many bits to represent a range of values. This goes as follows: 8 bits can represent whole number values from 0-255 12 bits can represent whole number values from 0-4,095 14 bits can represent whole number values from 0-16,383 16 bits can represent whole number values from 0-65,535 Density values are ratio values, like 1:1, 1000:1 35673:1 etc. They are positive integer values, simply because they are always related to 1. These values have a range, and in this case, since they are related to 1, they are a dynamic range...the minimum discernable value is 1, and the maximum is what ever it is. When a scanner says it has a (measured) dynamic range of 3.6, that means it can discriminate from density ratio values of 1:1 all the way up to 10 to the 3.6th power, or 3,981. That means that every ratio from 1:1 to 3,981:1 needs to be accommodated. That includes all intermediate values, 2:1, 3:1...186:1...2,999:1 etc. That means we need to have a sufficient number of bits to be able to hold all whole numbers from 1 to 3,981. Since 11 bits can represent whole number values from 0-2,047, that would mean we would not be able to hold all the values we wanted to hold. That would mean we would need to use 12 bits to hold the numbers from 1 to 3,981. We could, of course, use more bits than we need...and that does not increase the dynamic range of the scanner though. So, the conclusion is that dynamic range and number of bits ARE DIRECTLY related, in that you need a minimum number of bits to represent a particular dynamic range...but just because a scanner uses a particular number of bits, that does not mean that it can actually produce a dynamic range that uses/requires all those bits. Austin
Message
Dynamic range and bit depth. How they relate.
2001-09-28 by Austin Franklin
Attachments
- No local attachments were found for this message.