Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] What happened to Icefields?

2001-09-19 by Martin Wesley

Mike,

Nicely put and a good summary of the current state of affairs between 
the two ink systems.

My experiences with Piezo on the 1200 and the MIS VM on the 1280 are 
very similar. Mine differ only in the Dmax, which I find to be dead 
equal between the two as far as my eyeballs can tell, and while I see 
the sharpness difference under magnification, I do not see it at 
normal viewing distances but I am working with small prints. 

I would also like to suggest that it may be possible to use the same 
techniques as described in the Piezo manual to get WYSIWYG with the 
MIS VM. Print out at 21 step wedge using a particular VM curve and 
then match the on screen view to the step wedge using a custom Dot 
Gain Curve in Color Settings. Save this as a custom "Color Settings." 
Work with these setting to edit in grayscale then convert the file to 
a Gray Gamma 2.2 prior to the conversion to sRGB prior to printing. 
Not elegant perhaps workable. With a macro this could be simplified.

Thanks,

Martin


 
--- In DigitalBlackandWhiteThePrint@y..., "Michael J. Kravit" 
<kravit@b...> wrote:
> Nij,
> 
> I have just completed 2 months of testing and working with Paul 
Roark to develop curves for the MIS Variables on the 7000 (PC). I 
believe you are right when you say that there is a great amount of 
(snip)

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.