To Jerry Olson - If you still have any interest in black-only printing, I discovered over the weekend that an easy way to compensate approximately for the difference in ink acceptance between Epson Heavyweight Matte (or Archival Matte, I assume) and Legion Photo Matte is by way of the Print dialog: simply change the Paper Type setting from "Matte Paper Heavyweight" to "Photo Paper", and the printer will lay down just enough less ink to compensate. You will, of course, need to go into the Custom/Advanced section to make sure your dpi settings, dither, etc. are correctly adjusted. It's not perfect but it will get you close; I suppose you could then fine-tune by fiddling with the Brightness and Contrast sliders in the Advanced part of the Print dialog, but I haven't dared touch them yet... -- Nick NICHOLAS HARTMANN +1 (414) 271-4890 611 N. Broadway, Suite 509 fax: +1 (414) 271-4892 Milwaukee, WI 53202, USA polyglot@... Technical and scientific translator: German and French -> English
Message
Re: [Digital BW] Black only ink at 2880 DPI
2001-09-17 by Nicholas Hartmann
Attachments
- No local attachments were found for this message.