Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

BW printing on the 2100/2200 using Gimp-Print

2003-01-02 by danielstaver <daniel@petraflux.com>

After spending the whole night installing Red-Hat linux on a virtual 
machine (I normally use windows) and compiling various packages to 
get Gimp-Print to work I finally got to try how it would do BW 
printing on the 2100.

The good news is that it uses both the regular and the light black, 
so results are _much_ smoother than normal BO printing with the Epson 
driver. The bad news is that I get some microbanding, and the 
transitions between the two inks are less than perfect, but it's 
encouraging to discover new possibilities with this printer.

What I would like to do now is to somehow get Gimp-Print to print 
using only the two blacks, but tint the image with one additional 
colour. The Epson blacks are pretty warm, so I'd like to add a small 
amount of cyan to get a more neutral image. I would be grateful if 
someone with more experience with Gimp-Print could guide me in the 
right direction on how to do this.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.