Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: [Digital BW] Merlin and Osprey

2001-09-02 by Diana York / Hawk Meadow Morgans

I use Merlin and Osprey quite a bit (and Red Tail too) with the Piezo BW
system on a 3000. Not "every" application requires the same thing. I do some
photographs (mostly on Merlin and Peregrine, our smoothest papers) and the
customers are extremely happy. I do quite a bit of b/w artwork reproduction
(pencil, pen & ink, charcoal) with this system and use Red Tail (uncoated)
and Osprey (coated) and get EXCELLENT results.

Of course, I am a bit biased, as I am co-owner of Hawk Mountain Art Papers
:)

Thank you Mark - I still have a few of the Merlin prints you sent us -
Merlin did do an excellent job at detail reproduction - people are always
amazed when they see them - and they like the colorized effect (they think
it was done on purpose  :)

Diana York
Hawk Mountain Art Papers www.hawkmtnartpapers.com
100% cotton digital fine art inkjet print papers
Hawk Mountain Editions, Ltd.  www.hawkmtneditions.com
Fine Art Prints

----- Original Message -----
From: Antonis Ricos <antonisphoto@...>

> Mark,
> for the record, Merlin and Osprey did not do well with Piezo inks,
producing a
> dmax in the 1.43 - 1.48 range. If you get a better number with other
quads,
> please post. For reference, the Hahnemuhles get into the 1.60 range.
> Antonis
>
> PS. the URL for Hawk Mountain is always available in our Bookmarks
section.

"Mark Tucker"
>  I do know though, that Osprey is
> > acknowledged to be not as "sharp" as some of his newer
> > papers like Merlin.
> ...
> Again, best to test first, but Merlin
> > could be a good candidate, especially if you like Epson Smooth
> > Fine Art. It's very similar to that in look/feel, but whiter, and
stouter
> > than the rollweight of ESFA.
> >
> > Info at: http://www.hawkmtnartpapers.com
> >
> > -Mark Tucker

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.