Yahoo Groups archive

Digital BW, The Print

Index last updated: 2026-04-28 22:56 UTC

Message

Re: Print B&W with Epson 5000 color cartridges

2001-08-30 by Phil Bard

Daniele,

Sorry if this post shows up twice, first one was sent several hours ago 
but hasn't shown up.

Hopefully some of the folks on this list will be able to help you 
improve your output issues, but I just wanted to throw in 2 cents worth 
on the "neutral" subject.  I have yet to see a CMYK printer that can 
print a truly neutral B&W image without some color problems.  It is 
very difficult to make up a grayscale image out of CMYK dots since they 
need to be in absolutely perfect balance over the entire tonal range. 
This is a hardware, not software, problem.  The slightest shift will 
cause a cast or crossover (highs one color, shadows another).  Perhaps 
you can do it but I would encourage you to try to get a look at some 
actual quadblack images.  You will be amazed by them.  They do have 
their own set of issues, some inks don't print well on certain papers, 
DMax can be weak sometimes, etc., but overall it's a great system.  You 
do need a separate printer, but if you can dig up an 1160, you're in 
business for cheap...

Good luck,
Phil
http://philbard.com


--- In DigitalBlackandWhiteThePrint@y..., d.martini@c... wrote:
> I am just new in this group, and I see that everybody have great 
> knowledge about b&w digital printing, so I think there will be 
> someone who could advise me. I scan my films by a Powerlook III Umax 
> and Binuscan Photoperfect, then I print them by an Epson 5000 and 
> Power RIP 2000 software (with Photoshop 6): normally I am quite 
> satisfied of the results in color . The trouble begins with the b&w 
> printing: if I print only with black the result is poor, if I print 
> monochrome the result is almost "green", regardless the type of 
> paper; I have tried duotone method, and I obtain just 2 tones on the 
> print...The best result actually is this:I scan b&w negative in mode 
> CMYK (Binuscan do this), so I have on my monitor a b&w image but 
> CMYK, than I print it in color (power RIP). The print made in this 
> way is less "green" and more gray, but it is quite "flat". Before to 
> buy another printer b&w dedicated, with black and gray inks, I would 
> like to explore all the possibilities of the six color cartridges. Is 
> someone of you passed in this situation? Many thanks of your help. 
> Daniele Martini.

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.