Digital BW, The Print

I spoke with Bob at MIS about an inkset that would match the piezo/bw 
for the 7000. They have not developed that as yet (and may not at 
all). He referred me to Paul Roark, who, as we know, is developing a 
system that will work for the 7000 using MIS inks and the Epson 
driver. Paul strongly advises against using the MIS inks with the Cone 
driver because one of the inks is color and the resulting prints will 
be very strange looking. So, I am still searching for an alternative 
inkset that will work with the Cone driver rather than the expensive 
Cone inks. 

Thanks,
Stan

--- In DigitalBlackandWhiteThePrint@y..., sdmey4@a... wrote:
> Jerry since the Pro 24 Piezo machine reportedly only uses 4 
tones,With piezo, 
> Where on the MIS web site does it tell us 7000 users what inks to 
put where? 
> I see nothing about Hextones that implies they will work with the 
pro24 Piezo 
> Rip driver.
> I see a varible hextone mix and the old standard hextone or original 
set. Its 
> well known that the original Hextones won't work with the Piezo 
driver as the 
> order of inks is different.
> Not to make a dig on Cone and company, But the 7000 users are 
referrring to 
> thier software as a rip and all the other printers its a plug in. So 
1,500 
> for the rip and a 150 for the driver plugin? Is there a differance 
other than 
> what they call it?
> Steve M
> 
> n a message dated 08/23/2001 4:50:18 PM Pacific Daylight Time, 
> jerryolson@r... writes:
> 
> << They have. You'd just have to refill virgin 7000 cartridges with 
the MIS 
> inks.
>  
>  Jerry
>   >>